"Goggles Pizzano" (gogglespizzano)
07/25/2015 at 18:05 • Filed to: None
0
7|
"Goggles Pizzano" (gogglespizzano)
07/25/2015 at 18:05 • Filed to: None | 0
| 7 |
Running Windows 7 with dual Nvidia cards (non-sli), one monitor running on each. Every time I’m running a video full-screen on one monitor and open a new Waterfox window on the second, all instances of Waterfox freeze but audio from the video continues. Anyone know of a configuration or setting that would cure this? 928 CS images and info for your time.
Google translated from !!!error: Indecipherable SUB-paragraph formatting!!! :
Originally, the 928 S4 CS “Clubsport” intended as an exercise for the 928 S4 more sporty driving fun to give by applying weight savings in several areas. The total weight of the S4 CS confined thus to 1484 kg.
The inaugural event was early in the life cycle of the S4, namely in 1986 with the prototype 928 S4 “Leichtbau”. Soon Daana they came up with the idea to bring this development to market. In March 1988 the Club Sport was at the Geneva Motor Show presented to the public.
But never given much publicity to the Porsche 928 S4 Clubsport. There have been no extensive advertising campaigns for this model. Ultimately, this model is therefore only sold 71 copies .
The S4 Clubsport can be regarded as a prelude to the later sold 928 GT, which, like S4 CS was only available with a five-speed manual (M28/41), the final drive was shorter than the standard S4. The gear was shortened by 2 cm in order to get a more direct control.
In motor area of the piston, connecting rod and camshafts are adjusted. The electronics for the engine and the ignition have been adjusted. The exhaust was made lighter with less pressure and a rear silencer with two tailpipes. An engine of a Club Sport is distinguished by the addition “CS” at the end of the serial number.
Porsche gave despite these adjustments same power as the standard 5-liter V8 from the 928 S4, with 320 horsepower. In practice, the S4 Clubsport proved easily the 350 bhp true. The maximum torque was 430 Nm.
The transaxle had one primary and one vibration damper less. The transmission of the differential was explained a little shorter than the standard S4.
AddictedToM3s - Drives a GC
> Goggles Pizzano
07/25/2015 at 18:13 |
|
From my understanding, you should use one GPU for the monitors and the other for your PhysX/CUDA needs. Have you tried running it that way? Also, maybe it’s one of the settings in your BIOS trying to prioritize one card over the other?
|
Goggles Pizzano
> AddictedToM3s - Drives a GC
07/25/2015 at 18:22 |
|
Running dual Quadro 4000. Found an incredible heat reduction (a problem these are known for) by running one in each. I’ve dedicated the video card that’s running the small (cheap) monitor to Cuda and run my programs that use Cuda full screen on the large monitor. All works great except this one glitch.
Hmmm.
|
AddictedToM3s - Drives a GC
> Goggles Pizzano
07/25/2015 at 18:23 |
|
Are the drivers up to date?
|
Goggles Pizzano
> AddictedToM3s - Drives a GC
07/25/2015 at 18:25 |
|
Yepper.
I’m probably doing something I shouldn’t and this is the price. In reality it’s a pretty small price to pay.
:-)x
Steve in Manhattan
> Goggles Pizzano
07/25/2015 at 18:28 |
|
BUY.A.MAC.
That is all.
|
Goggles Pizzano
> Steve in Manhattan
07/25/2015 at 18:33 |
|
Why would I spend that kind of money only to run Windows on it so I can run Windows specific software?
;-)x
|
AddictedToM3s - Drives a GC
> Goggles Pizzano
07/25/2015 at 18:36 |
|
Yeah I can’t think of any other possible remedies. Hopefully someone else can chip in a solution for you.